Loading ...
Loading ...
Loading ...
EMBROIDERING TUTORIAL
81
2
■ Getting false thread breakage error
- Check that the position of the upper thread is
under the upper thread guide plates. (Refer to
page 57.)
- Check that the position of the upper thread is
around the thread tension disc. (Refer to page 59.)
- Check that no lint or dust has accumulated in the
thread tension disc. If it has, remove it. (Refer to
“Cleaning the thread paths of the upper threads”
on page 287.)
1 Upper thread guide plates
2 Thread tension disc
■ Thread tension changed suddenly
- Thread is caught on a rough edge of the spool of
upper thread.
- Upper thread is caught under the spool of thread.
- The thread dust or lint is gathered under the
bobbin’s tension spring.
- Check that no lint or dust has accumulated in the
thread tension disc. If it has, remove it. (Refer to
“Cleaning the thread paths of the upper threads”
on page 287.)
■ The embroidery frame becomes
separated from the carriage
Make sure that the positioning pins are placed into
the frame’s positioning slot and hole. (Refer to
page 50.)
To insure proper registration of pattern for
embroidery, turning off the machine and turning it
back on will allow the embroidery arm to reset it’s
registration points.
■ Unable to detach the frame from the
machine
Touch and to move the carriage, then
the frame will be detachable. (Refer to page 88.)
■ Cancel the current design and start
again
Select the “Home” key on the upper right of the
screen. The pattern and all information will be
deleted. (Refer to page 40.)
Useful external connection
functions
You can access various patterns by using the
machine’s USB port and SD card slot.
1 SD card slot
2 USB port for media (USB 2.0)
3 USB port for computer
■ Using SD cards
When using SD cards to import or export pattern
data, insert the card into the SD card slot.
1 SD card slot
2 SD card
Note
• Do not insert anything other than USB
media into the USB media port. Otherwise,
the USB media drive may be damaged.
Loading ...
Loading ...
Loading ...