Loading ...
Loading ...
Loading ...
APPENDIX
299
7
Error messages
If the start/stop button is pressed while the machine is not correctly set up or if an incorrect operation is
performed, the machine stops and informs you of the error with a buzzer and an error message. If an error
message appears, correct the problem according to the instructions in the message.
To close the message, touch or perform the correct operation, then touch . If the message
appears again, consult your nearest authorized Brother dealer.
Some malfunction occurred. There are too many characters in the
curved text arrangement for the
selected embroidery frame.
Change the text arrangement or the
embroidery frame.
Machine cannot receive any data from
the PC in the Link mode.
Turn off the machine, and check the
USB connection. After connect the USB
cord securely, turn on the machine
again. (Refer to page 169)
When embroidering the pattern for the
optional jumbo frame, the machine
failed to find the positioning mark.
Follow the procedure from step
h on
page 260, again.
Machine failed to recognize the
embroidery positioning mark.
Confirm that the embroidery positioning
mark is in the selected area. If problem
persists, reposition the mark.
When in camera mode by touching
, some keys are unavailable.
Touch to cancel the camera mode
to activate the key.
Loading ...
Loading ...
Loading ...