Loading ...
Loading ...
Loading ...
140
The machine can be stopped at any time; however, if the machine is stopped while it is embroidering, it
is better to go back a few stitches before continuing sewing to overlap the stitching. If the machine stops
at a color change, it is not necessary to go back through the stitching before continuing embroidering.
Stopping the machine at the next
color change
The machine can be set to stop before sewing the
next color.
a
While sewing the color before the point
where you wish to stop the machine, touch
so that it changes to .
b
After finishing sewing the area for the
current color, the next needle bar moves
into position and the machine stops before
sewing the next color.
→ changes back to .
• If the machine is temporarily turned off, you will be
asked if you wish to continue sewing or select a new
pattern when the machine is turned on again.
Touch to continue embroidering. (Refer to
“Resume Embroidering After Turning Off the
Machine” on page 122.)
Specifying pause locations before
embroidering
Pause locations can be specified in the pause
setting screen, displayed by touching .
a
Touch in the embroidering settings
screen.
→ The change thread color screen appears.
b
From the thread color sequence display,
select the thread color where you wish to
stop the machine before sewing it.
• If the desired thread color is not displayed, use the
scroll bar on the right side to display it.
1 Scroll bar
Setting the Machine to Stop at Color Changes
1
Loading ...
Loading ...
Loading ...