Loading ...
Loading ...
Loading ...
142
After embroidering begins, the machine can be stopped at a color change and a different needle bar can
be specified for the next color to be sewn.
By substituting an upper thread color already threaded on a different needle bar, the time for sewing can
be saved. For example, similar color thread can be substituted for temporary use.
a
Touch .
→ The temporary needle bar setting screen appears.
b
Touch the key for the needle bar threaded
with the thread that you wish to embroider
with.
→ The needle bar number changes and appears to
indicate the selected needle bar.
→ To cancel the setting, touch .
c
Touch .
→ The embroidering screen appears again.
Uninterrupted embroidering
(monochrome)
A selected pattern can be stitched out in one color
instead of multicolor. The machine will hesitate
but not stop between color steps, and then
continue till the pattern is completed.
a
Touch the key for the needle bar threaded
with the thread you wish to embroider
uninterruptedly.
b
Touch for the multicolor steps to
become shaded and the selected pattern
will embroider in a single color, instead of
changing the thread while embroidering.
→ The thread color displayed on the screen will be
grayed out.
• Touch again to return to the pattern’s original
settings.
Temporary Needle Bar Setting
Memo
• The thread color (needle bar) cannot be
changed in the middle of an area that is
being sewn.
Memo
• Even if uninterrupted embroidering has
been set, the DST thread trimming function
can be used (refer to page 227).
• After finishing the embroidery, uninterrupted
embroidery will be canceled.
Loading ...
Loading ...
Loading ...