Loading ...
Loading ...
Loading ...
SELECTING/EDITING/SAVING PATTERNS
149
5
■ Precautions on using the computer to create and save data
• If the name of the embroidery data file/folder cannot be identified, for example, because the name contains special
characters, the file/folder is not displayed. If this occurs, change the name of the file/folder. We recommend using the 26
letters of the alphabet (uppercase and lowercase), the numbers 0 through 9,”-”, and “_”.
• Embroidery data larger than 200 mm (H) × 360 mm (W) (approx. 7-7/8 inches (H) × 14 inches (W)) cannot be used. (All
patterns must be within the 200 mm (H) × 360 mm (W) (approx. 7-7/8 inches (H) × 14 inches (W)) pattern field size.)
• .pes files saved with the number of stitches or the number of colors exceeding the specified limits cannot be displayed.
The combined pattern can not exceed a maximum number of 500,000 stitches or a maximum number of 127 color
changes (Above numbers are approximate, depending on the overall size of the pattern). Use one of our pattern software
programs to edit the embroidery pattern so that it meets these specifications.
• Embroidery data stored in a folder created in USB media can be retrieved.
• Do not create folders in “Removable Disk” on a computer. If embroidery data is stored in a folder in “Removable Disk”,
that embroidery data cannot be retrieved by the machine.
■ Tajima (.dst) embroidery data
• Since Tajima (.dst) data does not contain specific thread color information, it is displayed with our default thread color
sequence. Check the preview and change the thread colors as desired.
Concerning USB media
• Do not disassemble or alter the USB media.
• Do not allow the USB media to become wet, such as with water, solvents, drinks or any other liquids.
• Do not use or store the USB media in a location exposed to strong static electricity or electrical interference.
• Do not use or store USB media in locations exposed to vibrations or impacts, direct sunlight, extreme dust (or lint), high
temperatures, high humidity, severe temperature fluctuations, or strong magnetic forces (such as from speakers).
• While embroidery data is being recalled from the USB media, do not allow the machine to be exposed to vibrations or
impacts, and do not attempt to remove the USB media from the machine.
• Some USB media may not be usable with this machine. Please visit our web site for more details.
• Only remove USB media while an access lamp on the USB media is not flashing (refer to “Saving embroidery patterns to
USB media/SD card” on page 161).
• For additional information, refer to the instruction manual included with the USB media that you have purchased.
• Do not unplug a USB device/media from this machine immediately after it has been plugged in. Be sure to wait at least 5
seconds before unplugging the USB device/media.
Loading ...
Loading ...
Loading ...