Loading ...
Loading ...
Loading ...
SELECTING/EDITING/SAVING PATTERNS
163
5
Connecting the USB using the
included USB cord clamps
When connecting the embroidery machine to a
computer, use the included USB cord clamps to
keep the cord away from the carriage.
Included cord clamps
Installation positions of the USB cord clamps
1 Front screw hole on the side of the machine
2 Rear screw hole on the side of the machine
a
Using the included Allen screwdriver,
remove the protective cap covering the
front screw on the side of the machine.
• Insert the end of the Allen screwdriver into the hole in
the protective cap, and then lightly pull out the
protective cap to remove it.
b
Open the USB cord clamp.
• With your fingernail, press on the tab to open the
clamp.
1 Tab
c
Hold the clip end of the USB cord clamp,
and then firmly insert the other end into the
screw hole where the protective cap was
removed.
d
As described in steps a through c,
remove the protective cap from the rear
screw hole on the side of the machine, and
then insert an opened USB cord clamp.
Note
• Do not insert the Allen screwdriver too far
into the hole in the protective cap;
otherwise, the machine or the Allen
screwdriver may be damaged.
12
1
Loading ...
Loading ...
Loading ...