Loading ...
Loading ...
Loading ...
APPENDIX
307
7
If the machine does not respond
when a key is pressed
If nothing happens when a key on the screen is
touched (no key can be selected or the keys are
misaligned), adjust the touch panel as described
below.
a
Touch anywhere inside the touch panel,
and turn the machine off, then on again.
• Continue touching the touch panel until the screen
shown below appears.
• The start/stop button is red.
→ The adjustments screen appears.
b
Use the included touch pen to touch the
center of the numbered crosses on the
screen, from 1 to 13.
→ AD Value X and AD Value Y numbers change with
the touch of each numbered cross to show variables.
• If the buzzer sounds when cross number 13 is
touched, an error occurred during setting, and
“ERROR” appears on the screen. Touch the crosses
again, starting with the number indicated on the
screen.
c
After making the necessary touch panel
adjustment, “SUCCESS” will show on the
screen.
d
Turn the machine off, and on again.
CAUTION
• Be sure to use the included touch pen to adjust
the touch panel. Do not use a mechanical
pencil, screwdriver or any other hard or sharp
object. Do not apply pressure to the LCD
screen display, otherwise damage to the
display may result.
Note
• If the keys still do not respond, even after
the touch panel is adjusted, or if the touch
panel cannot be adjusted, contact your
nearest authorized Brother dealer.
+1
+4
+5 +8
+11 +13
+9
+2 +3
+10
7+
6+
12+
Loading ...
Loading ...
Loading ...