Loading ...
Loading ...
Loading ...
98
When the embroidery machine is purchased, it was adjusted so that the beginning of the stitching was
from the center of the pattern. Therefore, move the frame and adjust the embroidering position so that the
center of the pattern aligns with the needle drop point at the sewing position. If you need to align the
embroidering position to the specific point, follow the procedure described in “Aligning the Embroidering
Position” on page 102. In addition, the angle of the entire pattern can be adjusted if the fabric cannot be
hooped evenly within the embroidery frame and the pattern is positioned at an angle on the fabric.
a
Touch , or in the embroidering
settings screen to select the speed.
1 Touch to move the frame by 0.1 mm.
2 Touch to move the frame by 0.5 mm.
3 Keep touching to move the frame at maximum
speed. While using the built-in camera (page 104),
the frame moves by 2.0 mm using the move key.
4 Move key
b
Touch , , , , , , and
in the embroidering settings screen.
Move the embroidery frame so that the needle drop
point is at the center of the area where you wish to
embroider.
→ The embroidery frame moves in the opposite
direction of the arrow.
→ The pattern in the pattern display area moves in the
same direction of the arrow.
1 Shows the vertical distance moved from center
2 Shows the horizontal distance moved from center
• Touch to move the embroidery frame
back to its original position (where the center of the
embroidery frame is aligned with the needle drop
point at the sewing position).
The pattern can also be moved by dragging it.
If a USB mouse is connected, move the mouse to
position the pointer on the desired pattern, and then
while holding in the left mouse button, drag the
pattern. The pattern can also be dragged by selecting it
directly in the screen with your finger or the touch
pen.
Changing the Embroidering Position
1
3
2
4
1
2
Loading ...
Loading ...
Loading ...