Loading ...
Loading ...
Loading ...
APPENDIX
293
7
After the threads are
automatically cut, the
upper thread is too
short and comes out of
the needle.
Lint or dust has accumulated around
the needle plate (moving knife, fixed
knife or thread retaining plate).
Remove any lint or dust around the
needle plate.
p.285
The upper thread
breaks.
The needle is not correctly installed. Correctly install the needle. p.86
The needle set screw is loose.
Use the Allen screw driver to tighten
the needle set screw.
p.86
The needle is bent or blunt. Replace the needle with a new one. p.33, 86
The area around the hole in the needle
plate is damaged.
1 Scratches/Burrs
Replace the needle plate or consult
your nearest authorized Brother dealer.
The needle is touching the needle
plate.
1 Needle
2 Needle plate hole
3 Needle touching hole
Consult your nearest authorized
Brother dealer.
The presser foot is set too high and not
correctly positioned.
The needle hits/touches the presser
foot.
Consult your nearest authorized
Brother dealer.
The area around the embroidery foot
hole is damaged.
1 Scratches/Burrs
Replace the presser foot.
Consult your nearest authorized
Brother dealer.
Using a specialty thread like a metallic
thread.
Slow down the machine sewing speed. p.139
Symptom Probable Cause Remedy Reference Page
Loading ...
Loading ...
Loading ...