Loading ...
Loading ...
Loading ...
EMBROIDERING SETTINGS
129
4
Appliqué pieces can be created from the built-in patterns and patterns on embroidery cards. This is
convenient for fabrics that cannot be embroidered or when you wish to attach an appliqué to a garment.
Creating an appliqué piece
The following pattern will be used to create an
appliqué piece.
a
Select the pattern to be used for the
appliqué.
b
In the pattern editing screen, touch .
c
Select the outline.
If is selected, an outline can be created around
the pattern.
→ Use or to specify the distance between the
pattern and the appliqué outline.
d
Check the preview in the screen, and then
touch .
e
After specifying the various settings, touch
.
f
Specify the embroidering settings, and then
touch to continue to the
embroidering screen.
Creating an Appliqué Piece
Note
• Felt or denim fabrics are recommended to
make the appliqué piece. Depending on the
pattern and fabric used, lighter weight
fabrics may cause the stitching to appear
smaller.
• For best results, be sure to use stabilizer
material for embroidering.
• Select a frame that matches the pattern
size. Frame options are displayed on the
LCD screen.
• Finish combining and editing the pattern
before selecting the appliqué setting. If the
pattern is edited after selecting the appliqué
setting, the appliqué stitching and pattern
may become misaligned.
• Since an outline is added, the pattern for an
appliqué piece (when the appliqué setting is
selected) will be larger than the original
pattern.
First, adjust the size and position of the
pattern as shown below.
1 Embroidering area
2 Approx. 10 mm
3 Pattern size
Memo
• If a border pattern is selected for the outline,
the border pattern can be enlarged,
reduced or moved.
• Touch to select a different outline
pattern.
Note
• At this time, the pattern and outline will be
grouped.
Loading ...
Loading ...
Loading ...