Loading ...
Loading ...
Loading ...
APPENDIX
309
7
You can use USB media or a computer to download software upgrades for your embroidering machine.
When an upgrade program is available on “ http://support.brother.com ”, please download the files
following the instructions on the website and steps below.
You can use USB to download software upgrades/updates (**********.upf) for your sewing machine.
Upgrade procedure using USB
media
a
While pressing the automatic threading
button, turn the main power to on.
→ The following screen will appear on the LCD.
b
Touch .
c
Insert the USB media into the USB port on
the machine. The media device should only
contain the upgrade file.
1 USB port
2 USB media
d
Touch .
→ The upgrade file is downloaded.
e
Remove the USB media, and turn the
machine off and on again.
Upgrading Your Machine’s Software
Note
• When using USB media to upgrade the software, check that no data other than the upgrade file is
saved on the USB media being used for this upgrade.
Note
• The access lamp will begin blinking after
inserting USB media, and it will take about 5
to 6 seconds to recognize the media. (Time
will differ depending on the USB media).
Note
• If an error occurs, a red text error message
will appear. When the download is
performed successfully, following message
will appear.
Loading ...
Loading ...
Loading ...