Loading ...
Loading ...
Loading ...
104
■ Positioning the pattern on thick
fabric
When positioning the pattern on the fabric thicker
than 2 mm, the fabric may not be detected correctly.
In order for the fabric to be correctly detected, its
thickness must first be measured.
a
Hoop the fabric in the embroidery frame,
and then attach the frame to the machine.
b
Select the pattern, and then display the
embroidering settings screen.
c
Display page 7 of the settings screen, and
then set “Fabric Thickness Check” to “ON”.
d
Press .
e
Press .
f
When the following message appears, touch
.
→ The embroidery frame moves so the fabric can be
scanned.
g
Affix the embroidery positioning sticker to
the fabric within the area indicated by the
red frame in the LCD, and then touch
.
h
When the following message appears,
remove the embroidery positioning sticker,
and then touch .
→ The embroidery positioning sticker affixed to the
fabric is detected, and then the embroidery frame
will be moved.
i
Continue with step e on page 102 to align
the pattern with the desired embroidery
position.
CAUTION
• Use fabrics with a thickness of less than 3 mm
(approx. 1/8 inch). Using fabrics thicker than 3 mm
(approx. 1/8 inch) may cause the needle to break.
Loading ...
Loading ...
Loading ...