Loading ...
Loading ...
Loading ...
STARTING AND DRIVING
* Option/accessory, for more information, see Introduction.
355
Ignition modes
The vehicle's ignition can be put in various
modes (levels) to make different functions availa-
ble.
The vehicle's ignition has 3 modes: 0, I, and II
that can be used to operate various functions
without starting the engine. The following table
shows examples of which functions are available
in the respective modes.
Mode Functions available
0
•
The odometer, clock and tem-
perature gauge are illuminated
•
Power seats* can be adjusted
•
The power windows can be oper-
ated
•
The 12-volt socket in the cargo
compartment can be used
•
The center display is activated
and can be used
•
The infotainment system can be
used for a limited time
In this mode, certain functions can
only be used for a limited time to help
minimize battery drain
I
•
The laminated panoramic roof*,
power seats*/windows,12-volt
sockets in the passenger com-
partment, Bluetooth, navigation
system*, climate system blower,
windshield wipers can be oper-
ated
•
The infotainment system will start
(if it was started when the ignition
was switched off)
Mode Functions available
II
•
The headlights illuminate
•
Warning/indicator lights illumi-
nate for 5 seconds
•
A number of other functions will
also be activated. However, the
heated seats* and heated rear
window functions can only be
activated when the engine is run-
ning.
This mode should only be used for
very short periods to help avoid
draining the battery.
Selecting an ignition mode
Start knob in the tunnel console
•
Ignition mode 0: unlock the vehicle and
keep the remote key in the passenger's com-
partment.
Loading ...
Loading ...
Loading ...