Loading ...
Loading ...
Loading ...
DRIVER SUPPORT
* Option/accessory, for more information, see Introduction.
286
ASL symbol
A road sign symbol (next to the stored
speed in the center of the speedome-
ter) can be displayed in three different
colors as explained in the following
table:
Road sign sym-
bol's color
Explanation
Green/yellow ASL is active
Gray ASL is in standby mode
Amber/orange ASL is temporarily in
standby mode (e.g., because
a speed limit sign could not
be read)
Limitations
Adjusting a set speed is done first when the vehi-
cle passes a speed limit sign. If a speed limit sign
cannot be read (e.g., because it is twisted, dam-
aged, faded, dirty, covered by snow, etc.) ASL will
go into standby mode because the system will
not have "seen" the speed posted on the sign
(SL will activate). The driver will have to react and
adapt the vehicle's speed. ASL will reactivate
when the vehicle passes a speed limit sign that
the system can read.
Related information
•
Speed limiter (SL)* (p. 283)
•
Activating/deactivating the Automatic Speed
Limiter (ASL)* (p. 286)
•
Changing tolerance for the Automatic Speed
Limiter (p. 287)
•
Starting and activating the Speed Limiter
(SL)* (p. 284)
•
Deactivating/reactivating the Speed Limiter*
(p. 288)
•
Road Sign Information (RSI)* (p. 290)
Activating/deactivating the
Automatic Speed Limiter (ASL)*
ASL is activated/deactivated in
the center display's Function
view.
Activating
1.
If SL is not activated, tap the
Speed Sign
Assist
button
1
in the center display's Func-
tion view.
> ASL will go into standby mode and a
green indicator light in the button will illu-
minate. A road sign symbol will be dis-
played in center of the speedometer.
2.
Press the
button on the left-side steer-
ing wheel keypad.
> ASL will be activated with the vehicle's
current speed.
1
If this button is tapped while SL is activated, ASL will immediately begin reading road signs.
Loading ...
Loading ...
Loading ...