Loading ...
Loading ...
Loading ...
INSTRUMENTS AND CONTROLS
103
NOTE
For manual opening, the sun shade must first
be fully open before it will be possible to open
the laminated panoramic roof. When closing,
the laminated panoramic roof must be fully
closed before the sun shade can be closed.
Tilt (ventilation) position
Tilt position, raised at the rear edge
Open (raise the rear edge of the front glass
section) by pressing the rear edge of the
control upward.
Close by pulling the rear edge of the control
downward/forward and holding it until the
laminated panoramic roof has closed com-
pletely.
If the sun shade is completely closed, it will open
approximately 2 inches (5 cm) when the lamina-
ted panoramic roof is opened to the tilt position.
Automatically closing the sun shade
6
When the vehicle is parked in sunny/warm
weather, the sun shade can be closed automati-
cally 15 minutes after the vehicle has been
locked to help keep the temperature in the pas-
senger compartment down and to protect the
upholstery from the sun.
This function is deactivated by default and can be
activated/deactivated:
1.
Tap
Settings in the center display's Top
view.
2.
Tap
My Car Locking.
Select Auto Close Sun Curtain to acti-
vate/deactivate.
Auto-stop
The laminated panoramic roof has an auto-stop
feature that is triggered if the glass section of the
roof or the sun shade is blocked in any way when
being closed. In this case, the laminated panor-
amic roof or sun shade will stop and reverse
automatically approximately 2 in. (5 cm) from the
point at which it was blocked (or will open fully to
the tilt position).
The auto-stop feature also functions when the
laminated panoramic roof or sun shade is being
opened.
The auto-stop feature can be overridden if the
closing procedure has been interrupted (e.g., due
to ice around the laminated panoramic roof) by
pressing and holding the control forward/down
until the roof is closed.
6
Not available in all markets
Loading ...
Loading ...
Loading ...