Loading ...
Loading ...
Loading ...
Operation
head and under no circumstances below eye
l
e
vel. Keep the back of your head always as
close to the head restraint as possible.
Adjusting the head restraint for short peo-
ple
Lower the head restraint completely, even if
your head is below its upper edge. In the low-
est position, there may be a small distance
between the head restraint and the backrest.
Adjusting the head restraint for tall people
Push the head restraint up as far as it will go.
WARNING
If travelling with the head restraints re-
mov
ed or improperly adjusted, the risk of
severe or fatal injuries in the event of acci-
dents and sudden braking or manoeuvres
increases.
●
Always travel with the head restraint cor-
rectly installed and adjusted.
●
To decrease the risk of cervical injuries in
the event of an accident, adjust the head
restraint correctly based on your height,
always making sure that its upper edge is
at the same height as the top of the head,
but never below eye level. Keep the back of
your head always as close to the head re-
straint as possible and centred.
●
Never adjust the head restraint while the
vehicle is in motion.
●
Under no circumst
ances should the rear
passengers travel while the head restraints
are in the non-use position.
CAUTION
When assembling and disassembling the
head r
estr
aints, do not let them meet the
top lining of the vehicle, the back rest of the
front seat or other parts of the vehicles. If
not, this could damage the vehicle.
Adjust the headrests
Fig. 93
Rear headrest: adjusting the headrest.
Adjusting the height of the head restraints
●
Move the headrest up or down in the direc-
tion of the corr
esponding arr
ow. Press button
›››
Fig. 93
1
to lower them
›
›
›
in Introduc-
tion on page 92.
●
The head r
estr
aint must lock correctly in
one position.
Removing and fitting the headrests
Removing the rear head restraints
To r
emove the head restraint, the corre-
sponding backrest must be partially folded
forward.
●
Unlock the backrest
›››
page 93.
●
Move the head restraint upwards until it ar-
rives t
o the top.
●
Press button
›››
Fig. 93
1
and fully remove
the headr
est.
●
Mo
ve the backrest until it engages properly
›››
in Folding down and raising the rear
seat backr
est on page 93
.
Fitting the rear head restraints
To mount the external head restraints, the
corresponding backrest must be partially fol-
ded forward.
●
Unlock the backrest
›››
page 93.
●
Insert the head restraint bars into the
guides until they perceptibly engage. It
should not be possible to remove the head
restraint from the backrest.
92
Loading ...
Loading ...
Loading ...