Loading ...
Loading ...
Loading ...
Drive system and driving
Gear selection
Contr
ol l
amps
It lights up red
There is a fault in the electrical system.
If the message Error is shown on the instrument
panel display: Electr. Syst. Stop the ve-
hicle!
Stop the vehicle immediately as soon as it is
possible and safe, park it outdoors and disconnect
the drive system. Seek specialist assistance.
and
They light up red
The electrical system has overheated.
If the message Electrical system overhea-
ted is sho
wn on the instrument panel display.
Stop! Manual!
Stop the vehicle immediately as soon as it is
possible and safe, park it outdoors and disconnect
the drive system. Do not pour coolant! Seek spe-
cialist assistance.
and
They light up yellow
Brake energy recuperation is not possible.
If the message Error is shown on the instrument
panel displ
ay: Recuperation. Check the
manual.
There is a failure in the brake energy recuperation.
Autonomy may be limited. Contact a specialised
workshop.
and
They light up yellow
Limited braking capacity.
If the message Error is shown on the instrument
panel displ
ay: Limited braking capacity.
The braking system does not work or has a fault.
Contact a specialised workshop.
It lights up green
The engine does not start.
The brak
e pedal is not pressed when changing the
position of the selector lever from N. To change the
position of the selector lever, press the brake pedal.
Flashes green
The lock button prevents starting to move.
The vehicl
e is prevented from moving forwards. The
selector lever locking button is not engaged.
Several warning and control lamps light up
f
or a f
ew seconds when the ignition is switch-
ed on, signalling that the function is being
verified. They will switch off after a few sec-
onds.
WARNING
Observe the safety warnings
››
›
in Con-
trol and w
arning lamps on page 70.
Gear selector lever
Fig. 138
Gear selector lever
The vehicle has a forward gear D/B and a r
e-
v
erse gear R.
The selector lever has a lock. To change the
selector lever from position P or N to another
position, switch on the ignition, press the
brake pedal and press the lock button of the
lever button in the direction of the arrow
›››
Fig. 138.
– Parking lock
The drive wheels are locked mechanically.
Select this position only when the vehicle is
stopped.
– Reverse gear
The reverse gear is engaged. Select this posi-
tion only when the vehicle is stopped.
»
145
Loading ...
Loading ...
Loading ...