User Manual - Page 84

For MII ELECTRIC 2019.

Loading ...
Loading ...
Loading ...
Operation
Alw
ays use your dipped beam head
lights if it is raining or if visibility is poor.
Never drive with daytime lights if the road
is not well lit due to weather or lighting
conditions.
On vehicles with rear lights with bulbs,
when activating the daytime running light
the rear lights are not switched on. A vehi-
cle which does not have the rear lights on
may not be visible to other drivers in the
darkness, in the case of heavy rain or in
conditions of poor visibility.
WARNING
If the headlights are set too high and not
used correctly, ther
e is a risk of dazzling or
distracting other road users. This could re-
sult in a serious accident.
Always make sure that the headlights are
correctly adjusted.
Note
The legal r
equirements regarding the use
of vehicle lights in each country must be
observed.
The dipped beam headlights will only
work with the ignition on. The side lights
come on automatically when the ignition is
turned off.
Fog lights
Fig. 79
Instrument console: light panel.
The warning lamps or al
so sho
w, on the
light switch or instrument panel, when the
front fog lights are on.
Turning on the front fog lights* : pull the
light switch out to its first click position
››
Fig. 79
1
, from positions , or .
Turning on the rear fog light : pull the
light s
wit
ch fully out
2
from position , or
. This contr
ol has only one position in ve-
hicles without fog lights.
To switch off the fog lights, press the light
switch or turn it to position .
Note
The rear fog light can dazzle drivers behind
you. You shoul
d use the rear fog light only
when visibility is very poor.
Turn signal lever and main beam
headlight
Fig. 80
Turn signal and main beam lever.
More the lever to the required position:
Right t
urn light or right
-hand parking light
(ignition switched off).
Left turn light or left-hand parking light
(ignition switched off).
Main beam on: control lamp lit up on
the instrument panel.
Light flash: on with the lever pushed. Con-
trol lamp lit up.
Push the lever all the way down to turn off the
corresponding function.
1
2
3
4
82
Loading ...
Loading ...
Loading ...