Loading ...
Loading ...
Loading ...
Instruments and warning/control lamps
Time
Hours and minut
es of the instrument panel
cl
ock. The time can be displayed in 12 or 24
hour format. If necessary, an S appears at the
top of the display to indicate that the summer
time is set.
Units
Adjusting the temperature, consumption and
distance units.
Service
Checking service messages.
Factory settings
The default factory setting of some functions
are reset in the Settings menu.
Service intervals
The inspection indication appears on the in-
strument panel displ
ay
›
››
Fig. 59
2
.
The dat
es of the services (i.e
. the next Inspec-
tion Service or change of brake fluid) are de-
tailed on the sticker on the door pillar or in the
Maintenance Schedule.
The set service intervals have been specified
with the service dependent on time/dis-
tance travelled.
Inspection reminder
If an inspection expires soon, an Inspection
reminder appears in the form of an abbrevia-
tion and an indication in km appears when
the ignition is switched on. The number of kil-
ometres shown is the maximum number that
may be driven until the next service.
Service due
After the service date, an audible warning is
given when the ignition is switched on and the
abbreviation will flash on the display for a
few seconds.
Check the service date
With the ignition switched on, the engine off
and the vehicle stopped, the current service
can be checked:
●
Select the menu Settings.
●
Select the Information option from the
Service submenu. If the service has not
been carried out when due, Service from
--- km or --- days will appear on the in-
strument panel display.
Restart the service interval display
If the service has not been performed by a
SEAT dealer, the indicator can be reset in the
instrument panel as described below:
●
Switch the ignition off.
●
Press the button on the instrument
panel and keep it pressed.
●
Switch ignition back on.
●
Release the button and press it again
briefly before about 10 seconds have
elapsed.
Do not restart the indicator between the
service intervals, otherwise the information
displayed will be incorrect.
Note
●
The service message disappears after a
f
ew seconds, when the engine is started or
when the
button is pressed on the
wiper le
ver.
●
If the 12-volt battery was disconnected
for a long period of time, it will not be possi-
ble to calculate the days remaining until
the next service. Hence, the indicator may
show incorrect calculations. In this case it
will be necessary to take into account the
maximum maintenance intervals allowed
›››
page 197.
67
Loading ...
Loading ...
Loading ...