User Manual - Page 195

For MII ELECTRIC 2019.

Loading ...
Loading ...
Loading ...
Wheels
The minimum permitted profile depth
1)
hav
e
been r
eached when the tyres have worn
down to the wear indicators. Replace the
tyres with new ones
››
.
Changing wheel
s ar
ound
In order to wear the wheels in a uniform man-
ner, it is recommended to interchange them
regularly according to the diagram
››
Fig. 168. The useful life of all the tyres will
then be about the same time.
WARNING
The tyres must be replaced at the latest
when the tread is w
orn down to the tread
wear indicators. Failure to follow this in-
struction could result in an accident.
Particularly in difficult driving conditions
such as wet or icy roads. It is important that
the tyre tread be as deep as possible and
be approximately the same on the tyres of
both the front and the rear axles.
The scant driving safety due to insuffi-
cient tread depth is particularly evident in
vehicle handling, when there is a risk of
“aquaplaning” in deep puddles of water
and when driving through corners, and
braking is also adversely affected.
The speed has to be adapt
ed according-
ly, otherwise there is a risk of losing control
over the vehicle.
Wheel bolts
The wheel bolts are mat
ched to the rims.
When installing different wheels (for instance
alloy wheels or wheels with winter tyres) it is
important to use the correct wheel bolts with
the right length and correctly shaped bolt
heads. This ensures that wheels are fitted se-
curely and that the brake system functions
correctly.
The wheel bolts must be clean and turn easi-
ly.
A special adapter is required to turn the anti-
theft wheel bolts*
››
page 40.
WARNING
Wheel nuts should never be greased or
oiled.
Use only wheel bolts which bel
ong to the
wheel.
If the prescribed torque of the wheel
bolts is too low, they could loosen whilst
the vehicle is in motion. Risk of accident! If
the tightening torque is too high, the wheel
bolts and threads can be damaged.
CAUTION
See
page 43 to find out the recommen-
ded tightening torque for wheel nuts for
steel and alloy rims.
Winter tyres
Winter tyres must be fitted on all f
our
wheel
s.
Only use winter tyres that are approved for
your vehicle.
Please note that the maximum permissible
speed for winter tyres may be lower than
for summer tyres.
Also note that winter tyres are no longer ef-
fective when the tread is worn down.
After fitting the wheels you must always
check the tyre pressures. When doing so,
take into account the correct tyre pressures
listed on the rear of the front left door frame
››
page 191.
In winter road conditions winter tyres will con-
siderably improve vehicle handling. The
»
1)
Follow the regulations of the country you are
driving in.
193
Loading ...
Loading ...
Loading ...