Loading ...
Loading ...
Loading ...
Emergencies
Changing the number plate bulbs
Fig. 54
In the rear bumper: remove the plate
light.
Fig. 55
Number plate light: detach the bulb
hol
der
.
●
Press the license plate light from left to right
with one hand and r
emo
ve it from the bumper
›››
Fig. 54.
●
Detach the number plate light carefully
from the bumper.
●
Turn the bulb holder with the bulb anti-
clockwise and remove it in the direction of
the arrow
›››
Fig. 55.
●
Replace the faulty bulb with a new identical
bulb.
●
Place the bulb holder in the number plate
light and press it in the opposite direction
from the arrow as far as it will go
›››
Fig. 55.
●
Insert the number plate light carefully into
the left edge of the opening on the bumper.
During this process, check that the assembly
direction of the number plate light is correct,
i.e. the spring must be on the right.
●
Insert the number plate light into the bump-
er until it audibly clicks into place.
Changing the side turn signal bulb
Fig. 56 Removing the side turn signal
Fig. 57 Side turn light: bulb change.
●
With one hand move the side turn signal
backw
ar
ds
›››
Fig. 56
1
.
●
Remove the side turn signal from the chas-
sis by l
e
verage
2
.
●
Remove the bulb holder with the bulb in the
dir
ection of the arr
ow
›››
Fig. 57
1
.
●
Remove the bulb holder bulb in a straight
dir
ection.
●
R
eplace the faulty bulb with a new identical
bulb.
●
Install the bulb holder.
●
Place the side turn signal on the chassis on
the side situated towards the rear of the vehi-
cle until the spring clicks into the other side of
the side turn signal.
56
Loading ...
Loading ...
Loading ...