User Manual - Page 216

For MII ELECTRIC 2019.

Loading ...
Loading ...
Loading ...
Technical data
Technical data
Indications about the
t
echnical dat
a
Important information
Introduction
The values indicated in the technical data
may diff
er depending on optional equipment
or v
ersion of the model, as well as in the case
of special vehicles and equipment for certain
countries.
The information in the official vehicle docu-
mentation takes precedence at all times.
Abbreviations used in the Technical Speci-
fications section
kW Kilowatt, engine power measurement.
PS
Pferdestärke (horsepower), formerly
used to denot
e engine power.
rpm, 1/min Revolutions per minute - engine speed.
Nm Newton metres, unit of engine torque.
Vehicle identification data
Vehicle identification number
The vehicl
e identification number (vehicle ID
number) can be read from the outside of the
vehicle through a window located on the
windscreen. This viewer is located in the low-
er part of the windscreen. The vehicle identifi-
cation number (chassis number) is also stam-
ped on the right water drain channel. The wa-
ter drain channel is located between the sus-
pension tower and the wing. Open the bonnet
to read the vehicle identification number .
Type plate
The type plate is located on the vehicle’s right
hand door frame. Vehicles for certain export
countries do not have a type plate.
Filling capacities
Capacity of the windscreen washer fluid con-
t
ainer
Windscreen washer
fluid container
appr
ox. 3 litres
Weights
Load on the roof
The maximum authorised load on the r
oof of
your vehicle is 75 kg.
Empty weight, total weight, axle loads
The empty weight of the vehicle with driver
(75 kg) was calculated according to the (EU)
1230/2012 standard. Optional equipment can
increase the empty weight, which means that
the possible useful load decreases propor-
tionally.
WARNING
The values indicated for the maximum per-
mitted w
eights must not be exceeded.
There is a risk of accident and damage!
214
Loading ...
Loading ...
Loading ...