User Manual - Page 24

For MII ELECTRIC 2019.

Loading ...
Loading ...
Loading ...
Safety
system may fail to trigger, or not trigger
correctly.
Airbag activation
The airbags deploy extremely rapidly, within
thousands of a second, to pr
ovide additional
protection in the event of an accident. A fine
dust may develop when the airbag deploys.
This is normal and it is not an indication of fire
in the vehicle.
The airbag system is only ready to function
when the ignition is on.
In special accidents instances, several air-
bags may activate at the same time.
In the event of minor head-on and side colli-
sions, rear-end collisions, overturning or roll-
over of the vehicle, airbags do not activate.
Activation factors
The conditions that lead to the airbag system
activating in each situation cannot be gener-
alised. Some factors play an important role,
such as the properties of the object the vehi-
cle hits (hard/soft), angle of impact, vehicle
speed, etc.
Deceleration trajectory is key for airbag acti-
vation.
The control unit analyses the collision trajec-
tory and activ
ates the respective restraint
system.
If the deceleration rate is below the prede-
fined reference value in the control unit the
airbags will not be triggered, even though the
accident may cause extensive damage to the
car.
The following airbags are triggered in seri-
ous head-on collisions:
Driver airbag.
Front passenger front airbag
The following airbags are triggered in seri-
ous side-on collisions:
Front side airbag on the side of the acci-
dent.
Curtain (head) airbag on the side of the ac-
cident.
In an accident with airbag activation:
the interior lights switch on (if the interior
light switch is in the courtesy light position);
the hazard warning lights switch on;
all doors are unlocked;
the electric current supply to the motor is
cut off.
Operation of the airbags
Airbag system control lamps
It lights up on the combi-instru-
ment
Fault in airbag system and seat belt tensioners.
Have the system checked immediately by a special-
ised workshop.

It lights up on the instrument
panel
Fault in airbag system.
Have the syst
em checked immediately by a special-
ised workshop.
Front passenger front airbag disabled.
Check if the airbag should be k
ept deactivated
Several warning and control lamps light up
f
or a f
ew seconds when the ignition is switch-
ed on, signalling that the function is being
verified. They will switch off after a few sec-
onds.
If the airbag and seat belt tensioner system
control lamp remains on or flashes, it indi-
cates a malfunction in the airbag and seat
belt tensioner system
››
. Have the system
check
ed immediat
ely by a specialised work-
shop.
If the front passenger airbag is deactivated,
the lamp     does not
22
Loading ...
Loading ...
Loading ...