Loading ...
Loading ...
Loading ...
Operating modes
You may still need to manually start playback
on the Bluet
ooth
®
sour
ce. When playback on
the Bluetooth
®
audio source is stopped, the
Infotainment system remains in Bluetooth
®
Audio mode.
Controlling playback
The extent to which the Bluetooth
®
audio
source can be controlled via the Infotainment
system depends on the connected Blue-
tooth
®
audio source.
With media players that support the AVRCP
Bluetooth
®
profile, playback on the Blue-
tooth
®
audio source can be automatically
started or stopped when the unit is switched
to Bluetooth
®
Audio mode or to a different au-
dio source. In addition, it is possible to view or
change the track via the Infotainment system.
WARNING
Do not perform the pairing and connection
process whil
e driving. This may cause an
accident!
Note
●
Due to the l
arge number of possible Blue-
tooth
®
audio sources, it is not possible to
guarantee fault-free operation of all de-
scribed functions for all these sources.
●
To operate the media and phone with the
Bluetooth
®
device connected, please read
the electronic Instructions Manual of the
manufact
urer.
●
Only use compatible Bluetooth
®
devices.
You can request information about compat-
ible Bluetooth
®
products at a SEAT Author-
ised Service or online.
External audio source connected to
the AUX-IN multimedia socket
Depending on the version of the vehicle, there
is an AUX-IN connection on the fr
ont of the r
a-
dio
›››
page 114, in the glove compartment on
the passenger side, on the centre console or
on the armrest between the front seats.
The AUX-IN multimedia connection can only
be used with a 3.5 mm jack.
A connected external audio source is played
over the vehicle speakers and cannot be
controlled via the radio system controls.
The AUX-IN multimedia connection must be
activated in the system settings so it can be
displayed on the Media selection menu
›››
page 126.
Connecting an external audio source to
the AUX-IN multimedia socket
●
Lower the base volume on radio.
●
Connect the external audio source to the
AUX-IN multimedia socket.
●
Start playback on the external audio
source.
●
In the Media mode, press the
equip-
ment butt
on t
o display the Media source se-
lection menu again
›››
page 126.
●
Press the function button.
The output volume of a connected external
audio source should be adjusted to the vol-
ume of the other audio sources.
Adjust the playback volume
If you need to increase the playback volume
for the external audio source, first lower the
base volume on the radio system.
If the sound from the external audio source is
too low, increase the output volume on the
external audio source, if possible. If this is not
enough, adjust the input volume in the sys-
tem settings to Level 2 or Level 3.
If the sound from the connected external au-
dio source is too loud or distorted, lower the
output volume on the external audio source,
if possible. If this is not enough, change the
input volume to Level 2 or Level 1.
Note
●
When the playback fr
om the external au-
dio source ends or the connection to the
AUX-IN socket is interrupted, the radio goes
back to the AUX menu.
»
129
Loading ...
Loading ...
Loading ...