Loading ...
Loading ...
Loading ...
Transport and practical equipment
connected to it can be used when the igni-
tion is swit
ched on.
●
Should a connected electrical device
overheat, switch it off and unplug it imme-
diately.
CAUTION
●
T
ak
e into account the operating instruc-
tions of the devices to be connected!
●
Never exceed the maximum power rating
as this could damage the vehicle's general
electrical system.
●
To avoid damaging the vehicle’s electri-
cal system, never connect accessories
supplying power such as solar panels or
battery chargers for charging the 12-volt
battery to the 12-volt power socket.
●
Only use accessories with approved
electromagnetic compatibility according
to current regulations.
●
To avoid damage due to voltage fluctua-
tions, switch off all devices connected to
the 12 V power sockets before switching the
ignition on or off and before starting the
drive system.
●
Never connect an appliance to the 12 volt
power socket that consumes more than the
power indicated in watts. Exceeding the
maximum power absorption could damage
the vehicle's electrical system.
Note
●
Unshielded equipment can cause int
er-
ference on the radio equipment and the ve-
hicle's electrical system.
●
Interference can occur on the radio's AM
waveband if electrical appliances are used
near the aerial.
Smartphone support
Por
table smartphone support
Fig. 107
Assembling the universal support and
the hol
ding arm.
Fig. 108
On the centre console: close the
compartment wher
e the inf
otainment system is
housed.
Removing the smartphone
●
Grip the smartphone firmly with one hand.
●
Press the unlock button
›
›
›
Fig. 108
5
until
the upper arm of the univ
ersal support is r
e-
leased.
●
Remove the smart phone and, as the case
may be, unplug any cables.
Inserting a smart phone
●
If necessary, install the smartphone hous-
ing
›››
.
●
Connect the smartphone.
●
Place the smartphone on the bottom
mountings. T
o adjust the l
ower fittings, press
the button
›››
Fig. 108
4
»
103
Loading ...
Loading ...
Loading ...