Loading ...
Loading ...
Loading ...
Introduction
Menu option: submenus with repercussion
Show clock in standby mode: When the
device is t
urned off, the current time is shown on
the display.
Colour: Here you can sel
ect marking colours for
the screen.
Language: Here you can manually set the desir
ed
language for the user interface. Alternatively, you
can let the instrument panel language be automati-
cally selected.
Bluetooth:
Bluetooth: Press t
o deactivate Bluetooth
®
. All
existing connections are disconnected.
Visibility: Turn Bluetooth
®
visibility on and
off.
Visible: Bluetooth
®
visibility is activated.
Not visible: Bluetooth
®
visibility is deacti-
vated. Bluetooth
®
visibility must be active for
pairing a Bluetooth
®
device with the infotain-
ment system.
Forename: Display or change the name of the
device. This name will be shown to other Blue-
tooth
®
devices in your Bluetooth
®
settings.
Paired devices: Viewing paired devices. Dis-
connection and connection of Bluetooth
®
devices
and individual Bluetooth
®
profiles.
Searching for a device: Search for visible
Bluetooth
®
devices that are within range of the in-
fotainment system. The maximum range is ap-
prox. 10 meters.
Menu option: submenus with repercussion
BT Audio (A2DP/AVRCP): If an ext
ernal au-
dio source is to be connected to the infotainment
system via Bluetooth
®
, this function must be ac-
tive
›››
page 128.
Application connection
Data transfer active
Registry
Remove source safely: With this option you
can safely r
emove an inserted SD card or a connec-
ted USB device.
Factory settings: Y
ou can r
estore the factory
settings of Radio, Media, Sound and System
separately or together.
System information: Status of technical data
of the device.
Copyright: Data of the software used.
a)
Valid only for the FM frequency band.
b)
This function depends on the country and unit in
question.
Oper
ation of speed-dependent v
olume in-
crease
The speed-dependent volume increase func-
tion automatically adjusts the volume based
on the speed of the vehicle.
The volume increase can be adjusted in lev-
els from 1 to 7.
If the selected level is low, the volume only in-
creases slightly when the speed increases, if
on the contrary it is high, the volume increa-
ses considerably. On 0 the speed-dependent
volume increase is disconnected.
DAB-FM LINK operation
If the DAB station being listened to can no
longer be tuned in (e.g., there is no DAB cov-
erage), the device will try to find and tune the
same station on the FM frequency band.
To allow automatic station tracking on all fre-
quencies, the DAB station and the FM station
need to broadcast the station identification,
or to signal through DAB which FM station
corresponds to the same DAB station.
When the corresponding FM station has been
found, (FM) is displayed behind the name of
the station. If the corresponding DAB station
becomes available again, it returns to DAB
mode after a while.
If the signal is too weak and the DAB station in
question cannot be found again in the FM
band, the radio sound is muted.
119
Loading ...
Loading ...
Loading ...