Loading ...
Loading ...
Loading ...
(supplied) and an AC adaptor (supplied).
Note
The camera will not activate if there is no remaining battery. Insert a sufficiently
charged battery pack into the camera.
If you use the camera while power is being supplied from a wall outlet (wall
socket), make sure that the icon ( ) is displayed on the monitor.
Do not remove the battery pack while power is supplied from a wall outlet (wall
socket). If you remove the battery pack, the camera will be turned off.
Do not remove the battery pack while the access lamp is lit. The data in the
memory card may be damaged.
As long as the power is on, the battery pack will not be charged even if the
camera is connected to the AC Adaptor.
Under certain conditions, power may be supplied from the battery pack
supplementarily even if you are using the AC adaptor.
Do not remove the Micro USB cable while power is supplied from a wall outlet
(wall socket). Before you remove the Micro USB cable, turn off the camera.
Depending on the camera and battery temperature, the continuous recording
time may be shortened while power is supplied from a wall outlet (wall socket).
When using a mobile charger as a power source, confirm that it is fully charged
before use. Also, be careful of the remaining power on the mobile charger
during use.
[16] How to Use Preparing the camera Charging the battery pack
Removing the battery pack
How to remove the battery pack
1. Make sure that the access lamp is not lit, and turn off the camera.
2. Open the battery/memory card cover.
3. Slide lock lever (A) and remove the battery pack.
Loading ...
Loading ...
Loading ...