Loading ...
Loading ...
Loading ...
The camera settings may be reset if the battery pack is ejected while the power
is on. When ejecting the battery pack, first turn the power off and check that the
access lamp is not illuminated before ejecting.
[370] Troubleshooting Troubleshooting Others
The product does not work properly.
Turn off the product. Remove the battery pack and insert it again. If the product
is hot, remove the battery pack, and allow it to cool down before trying this
corrective procedure.
If an AC-PW20 AC Adaptor (sold separately) is used, disconnect the power
cord. Connect the power cord and turn on the product again. If the product
repeats the same error often or still does not work after trying these solutions,
consult your Sony dealer or local authorized Sony service facility.
[371] Troubleshooting Messages Messages
Warning messages
Set Area/Date/Time.
Set the area, date and time. If you have not used the product for a long time,
charge the internal rechargeable backup battery.
Power insufficient.
The cleaning mode will not operate when the remaining battery charge is less
than (3). We recommend using the AC Adaptor AC-PW20 when using
cleaning mode.
Unable to use memory card. Format?
The memory card was formatted on a computer and the file format was
modified. Select [Enter], and then format the memory card. You can use the
memory card again, however, all previous data in the memory card is erased. It
Loading ...
Loading ...
Loading ...