Loading ...
Loading ...
Loading ...
[335] Troubleshooting Troubleshooting Shooting still images/movies
The image is whitish (Flare)./Blurring of light appears on
the image (Ghosting).
When pointing the lens toward the strong light source, excessive light enters
the lens and the image may come out white (flare) or extraneous light (ghost
images) may appear on the image, but this is not a malfunction.
When using the zoom lens, attach the lens hood. Set up the composition so
that you shoot images while avoiding backlit condition.
[336] Troubleshooting Troubleshooting Shooting still images/movies
The corners of the picture are too dark.
If any filter or hood is used, take it off and try shooting again. Depending on the
thickness of the filter and improper attachment of the hood, the filter or the hood
may partially appear in the image. The optical properties of some lenses may
cause the periphery of the image to appear too dark (insufficient light). You may
compensate for this phenomenon with [Shading Comp.].
[337] Troubleshooting Troubleshooting Shooting still images/movies
The color tones of the image displayed on the
monitor/the viewfinder look unnatural.
[Gamma Disp. Assist] has been activated. Set [Gamma Disp. Assist] to [Off].
[Gamma Disp. Assist] is not working properly. The [Picture Profile] settings are
cancelled when you select other than [Off] for [Picture Effect] or when you use [
Silent Shooting], even if [Gamma] is set to [S-Log2] or [S-Log3]. Therefore,
the color tones are not displayed correctly when [Gamma Disp. Assist] is set to
[Auto]. To display the color tones properly, set [Gamma Disp. Assist] to [Off].
Loading ...
Loading ...
Loading ...