User Manual - Page 279

For ILCE6300M/B.

Loading ...
Loading ...
Loading ...
discharge it in the product at least once a year before storing it. Remove the
battery pack from the camera and store the battery in a cool, dry place.
To use the battery pack up, leave the product in slide show playback mode until
the power goes off.
To prevent staining the terminal, short-circuiting, etc., be sure to use a plastic
bag to keep away from metal materials when carrying or storing the battery
pack.
On battery life
The battery life is limited. If you use the same battery repeatedly, or use the
same battery for a long period, the battery capacity decreases gradually. If the
available time of the battery is shortened significantly, it is probably time to
replace the battery pack with a new one.
The battery life varies according to how the battery pack is stored and the
operating conditions and environment in which each battery pack is used.
[286] How to Use Precautions/This product Precautions
Charging the battery pack
The supplied AC Adaptor is dedicated to this product. Do not connect with other
electronic devices. Doing so may cause a malfunction.
Make sure to use a genuine Sony AC Adaptor.
If the product's charge lamp flashes while charging, remove the battery pack
being charged, and then insert the same battery pack firmly back into the
product. If the charge lamp flashes again, this may indicate a faulty battery or
that a battery pack other than the specified type has been inserted. Check that
the battery pack is the specified type.
If the battery pack is the specified type, remove the battery pack, replace it with
a new or different one and check that the newly inserted battery is charging
correctly. If the newly inserted battery is charging correctly, the previously
inserted battery may be faulty.
If the charge lamp flashes even if the AC Adaptor is connected to the product
and the wall outlet (wall socket), this indicates that charging has stopped
temporarily and is on standby. Charging stops and enters standby status
automatically when the temperature is outside of the recommended operating
Loading ...
Loading ...
Loading ...