Loading ...
Loading ...
Loading ...
(77,1)
北米Model "A1360BE-A" EDITED: 2018/ 8/ 31
Lock release knob
1) Unlocked
2) Locked
A) Unlocking marker in red
To return the seatback to its original
position, raise the seatback until it locks
into place and make sure that the unlock-
ing marker on the lock release knob is no
longer visible.
WARNING
When you return the seatback to its
original position, check that the
unlocking marker on the lock re-
lease knob is not visible. Also, move
the seatback back and forth to
confirm that it is securely fixed in
place. If the seatback is not securely
fixed in place, the seatback may
suddenly fold down in the event of
sudden braking, or objects may
move out from the cargo area, which
could cause serious injury or death.
& Head restraints
S01AQ04
WARNING
The front seat head restraints are
designed to be installed into the
front seats only. The rear seat head
restraints are designed to be in-
stalled into the rear seats only. Do
not attempt to install the front seat
head restraints into the rear seats, or
the rear seat head restraints into the
front seats.
NOTE
It is possible to adjust the angle of the
front seat head restraints only. When
installing the front seat head restraints,
make sure that the angle of the head
restraints can be adjusted.
! Front seats
S01AQ0401
Both the driver’s seat and the front
passenger’s seat are equipped with head
restraints. Both head restraints are adjus-
table in the following ways.
! Height adjustment
S01AQ040101
1) Head restraint
2) Release button
To raise:
Pull the head restraint up.
To lower:
Push the head restraint down while press-
ing the release button on the top of the
seatback.
To remove:
While pressing the release button, pull out
the head restraint.
– CONTINUED –
Seats
75
1
Seat, seatbelt and SRS airbags
Loading ...
Loading ...
Loading ...