Loading ...
Loading ...
Loading ...
(254,1)
北米Model "A1360BE-A" EDITED: 2018/ 8/ 31
4-3. Automatic climate con-
trol operation
S04AI
When this mode is selected, the fan speed,
airflow distribution, air-inlet control, and air
conditioner compressor operation are
automatically controlled. To activate this
mode, perform the following.
1. Press the AUTO button. The indicator
light “FULL AUTO” on the multi-function
display (color LCD) illuminates.
2. Set the preferred temperature using
the temperature control dial.
NOTE
. Operate the automatic climate con-
trol system when the hybrid system is
running.
. Even when cooling is not necessary,
the air conditioner compressor will
automatically turn on if the temperature
is set much lower than the current
outlet air temperature. Even in this
case, the “A/C” indicator light on the
control panel illuminates.
. The controllable temperature range
may vary depending on the regional
specifications of the vehicle.
. If you operate any of the buttons on
the control panel other than the ON/
OFF button, rear window defogger
button, and temperature control dial
during FULL AUTO mode operation, the
“FULL” indicator light on the multi-
function display (color LCD) will turn
off and the “AUTO” indicator light will
remain illuminated. You can then manu-
ally control the system as desired using
the button you operated. To change the
system back to the FULL AUTO mode,
press the AUTO button.
To turn off the climate control system,
press the ON/OFF button. Then the air
inlet selection will be set to the following.
. When the air inlet selection is set to
auto mode: Outside air circulation
. When the air inlet selection is set to
manual mode: No change
& Sensors
S04AI03
The sensors are located as follows.
1) Interior air temperature sensor
2) Solar sensor
The automatic climate control system
employs several sensors. These sensors
Automatic climate control operation
252
Loading ...
Loading ...
Loading ...