Loading ...
Loading ...
Loading ...
(317,1)
北米Model "A1360BE-A" EDITED: 2018/ 8/ 31
at all even when a vehicle is present
in a neighboring lane or approach-
ing from either side.
The driver is responsible for paying
attention to the rear and side areas
of the vehicle.
& System features
S07BM01
BSD/RCTA consists of the following func-
tions.
. To detect a vehicle in a blind spot on an
adjacent lane or a vehicle approaching at
high speed while driving the vehicle (Blind
Spot Detection).
. To detect a vehicle approaching from
the right or left while reversing the vehicle
(Rear Cross Traffic Alert).
The system uses radar sensors for the
above functions.
NOTE
The BSD/RCTA radar sensor has been
certified by the radio wave related laws
of the U.S. When driving in other
countries, certification of the country
where the vehicle is driven must be
obtained. For certification in the U.S.,
refer to “Certification for the BSD/
RCTA” FP322.
! Blind Spot Detection (BSD)
S07BM0101
1) Operating range
The system warns the driver of dangers as
follows.
. If the system detects a vehicle existing
in the blind spot, the BSD/RCTA approach
indicator light(s) on the outside mirror(s)
will illuminate.
BSD/RCTA approach indicator light
. If the driver operates the turn signal
lever in the direction which the BSD/RCTA
approach indicator light is illuminating, the
corresponding BSD/RCTA approach indi-
cator light will flash.
– CONTINUED –
BSD/RCTA
315
7
Starting and operating
Loading ...
Loading ...
Loading ...