Loading ...
Loading ...
Loading ...
(404,1)
北米Model "A1360BE-A" EDITED: 2018/ 8/ 31
tempt to take its connectors
apart, as that may activate the
system or it can render it inop-
erative. NEVER use a circuit tes-
ter for this wiring. If your SRS
airbag or seatbelt pretensioner
needs service, consult your near-
est SUBARU dealer.
NOTE
SUBARU does not endorse the use of
non-SUBARU approved flushing sys-
tems and strongly advises against
performing these services on a
SUBARU vehicle. Non-SUBARU ap-
proved flushing systems use chemi-
cals and/or solvents which have not
been tested or approved by SUBARU.
SUBARU warranties do not cover any
part of the vehicle which is damaged by
adding or applying chemicals and/or
solvents other than those approved or
recommended by SUBARU.
& Before checking or servicing
in the engine compartment
S11AB01
WARNING
. Always stop the engine and apply
the parking brake firmly to pre-
vent the vehicle from moving.
. Always let the engine cool down.
Engine parts become very hot
when the engine is running and
remain hot for some time after the
engine has stopped.
. Do not spill engine oil, engine
coolant, brake fluid or any other
fluid on hot engine components.
This may cause a fire.
. When the ignition switch is in the
“ON” position, the cooling fan
may operate suddenly even when
the hybrid system is stopped. If
your body or clothes come into
contact with a rotating fan, that
could result in serious injury. To
avoid risk of injury, always turn
the push-button ignition switch
to the “OFF” position and con-
firm that the operation indicator
on the switch is turned off. Then
take the access key fob out from
the vehicle.
& When checking or servicing
in the engine compartment
S11AB03
CAUTION
. Do not contact the engine cover
while checking the components
in the engine compartment.
Doing so may cause your hand
to slip off the cover and result in
an unexpected injury.
Maintenance precautions
402
Loading ...
Loading ...
Loading ...