Loading ...
Loading ...
Loading ...
(293,1)
北米Model "A1360BE-A" EDITED: 2018/ 11/ 7
system by operating the push-button
ignition switch, do not stop the hybrid
system during driving except in an
emergency.
& Automatic shut down
S07BE09
This function is a safety system that
activates when the user forgets to turn off
the hybrid system.
! System standby
S07BE0901
When the following conditions are satis-
fied, the system judges that the vehicle has
been left unattended and engages stand-
by state. At this time, a message is
displayed on the combination meter and
the buzzer sounds to notify the user of the
standby state.
. The Hybrid READY indicator light is
illuminated and the vehicle is stopped
(vehicle speed 3 mph (5 km/h) or less).
. The select lever is in the “P” position.
. The driver’s seatbelt is not fastened.
. Opening of the driver’s door was
detected.
! System operation
S07BE0902
When the engine is started from standby
state and the remaining charge of the high
voltage battery is low, the system begins a
10 minute count. When approximately 10
minutes have passed, a message is
displayed on the combination meter. At
this time, the buzzer sounds for 5 seconds,
and then the hybrid system automatically
turns off.
NOTE
If the automatic shut off system devi-
ates from the operating condition dur-
ing the system standby state or the 10
minute count state, the system will be
canceled.
& When access key fob does
not operate properly
S07BE05
Refer to “Access key fob – if access key
fob does not operate properly” FP384.
7-5. Continuously variable
transmission
S07BG
WARNING
Do not shift from the “P” or “N”
position into the “D”, “B” or “R”
position while depressing the accel-
erator pedal. This may cause the
vehicle to jump forward or back-
ward.
CAUTION
. Shift into the “P” or “R” position
only after the vehicle is comple-
tely stopped. Shifting while the
vehicle is moving may cause
damage to the transmission.
. Never move the vehicle rearward
by inertia with the select lever set
in a forward driving position or
move the vehicle forward by
inertia with the select lever set
in the “R” position. Doing so may
result in an unexpected accident
or malfunction.
. Do not shift from the “D”/“B”
position into the “R” position or
vice versa until the vehicle has
– CONTINUED –
Continuously variable transmission
291
7
Starting and operating
Loading ...
Loading ...
Loading ...