Subaru 2019 Crosstrek Hybrid

OWNER'S MANUAL - Page 289

For 2019 CROSSTREK HYBRID.

PDF File Manual, 496 pages, Read Online | Download pdf file

Loading ...
Loading ...
Loading ...
(287,1)
北米Model "A1360BE-A" EDITED: 2018/ 8/ 31
NOTE
. You will see the sign in the fuel
gauge. This indicates that the fuel filler
door is located on the right side of the
vehicle.
. If the fuel filler cap is not tightened
until it clicks or if the tether is caught
under the cap, the CHECK ENGINE
warning light/malfunction indicator
light may illuminate. Refer to “CHECK
ENGINE warning light/Malfunction in-
dicator light” FP184.
. If the fuel filler door is not securely
closed, a message is displayed on the
combination meter (color LCD) and the
CHECK ENGINE warning light/malfunc-
tion indicator light may illuminate.
Refer to “CHECK ENGINE warning
light/Malfunction indicator light”
FP184.
CAUTION
. Never add any cleaning agents to
the fuel tank. The addition of a
cleaning agent may cause da-
mage to the fuel system.
. After refueling, turn the cap to the
right until it clicks to ensure that
it is fully tightened. If the cap is
not securely tightened, fuel may
leak out while the vehicle is being
driven or fuel spillage could oc-
cur in the event of an accident,
creating a fire hazard.
. Do not let fuel spill on the exterior
surfaces of the vehicle. Because
fuel may damage the paint, be
sure to wipe off any spilled fuel
quickly. Paint damage caused by
spilled fuel is not covered under
the SUBARU Limited Warranty.
. Always use a genuine SUBARU
fuel filler cap. If you use the
wrong cap, it may not fit or have
proper venting and your fuel tank
and emission control system
may be damaged. It could also
lead to fuel spillage and a fire.
. Immediately put fuel in the tank
whenever the low fuel warning
light illuminates. Engine misfires
as a result of an empty tank could
cause damage to the engine.
Continuing to operate your vehi-
cle at an extremely low fuel level
may result in a reduction of
engine performance.
7-2. State emission testing
(U.S. only)
S07AB
WARNING
Only use a four-wheel dynamometer
when testing an All-Wheel Drive
(AWD) model.
Testing of an AWD model must
NEVER be performed on a single
two-wheel dynamometer. Attempt-
ing to do so will result in uncon-
trolled vehicle movement and may
cause an accident or injuries to
persons nearby.
CAUTION
. At state inspection time, remem-
ber to tell your inspection or
service station in advance not to
place your SUBARU AWD vehicle
on a two-wheel dynamometer.
Otherwise, serious transmission
damage will result.
. Resultant vehicle damage due to
improper testing is not covered
under the SUBARU Limited War-
ranty and is the responsibility of
the state inspection program or
CONTINUED
State emission testing (U.S. only)
285
7
Starting and operating
Loading ...
Loading ...
Loading ...