Loading ...
Loading ...
Loading ...
(66,1)
北米Model "A1360BE-A" EDITED: 2018/ 8/ 31
Symptom Likely cause Correction procedure
Charging starts immediately,
even though charge sche-
dule is registered.
“Charge Now” is set to “On”.
When charging according to the timer, set “Charge Now” to
“Off”. Refer to “
Setting the Remote Battery Charging Timer”
FP58.
The charge schedule is set to “Off”.
Check that charge schedule is not set to “Off”. Refer to
“
Setting the Remote Battery Charging Timer” FP58.
The charging mode is set to “Departure time” and the
schedule departure time is close to current time.
When the system determines that there is no time to finish
charging by the set scheduled departure time, it starts
charging immediately. Check the charge schedules.
The charge cable was removed and reinserted while the
charging indicator was flashing.
If the charge cable is removed and reinserted while the
charging indicator is flashing, the charging timer is
canceled. Temporarily remove the charge cable, and then
reconnect it.
The remote climate control system was operated.
When the remote climate control system is operated, the
system will start charging immediately, even if the charge
schedule is registered. To carry out charging using the
timer, stop the remote climate control system, and then
reconnect the charge cable.
“Hybrid system battery heating setting” operated.
When the charging mode is set to “Departure time”, “hybrid
battery heating function” may operate before charging
starts. Check the status of the charging indicator. Refer to
“
Charging indicator” FP45.
Charging ends earlier than
time set in “Departure time”.
The charging end time does not match the estimated end
time due to the condition of the power source or the outside
temperature.
If sudden changes in temperature or changes in the
condition of the power source occur while charging,
charging may end earlier than the time estimated by the
system.
Charging is not complete,
even though it is time set in
“Departure time”.
The air conditioning-linked setting is set to on.
When air conditioning-linked setting is set to on, the air
conditioning operates until the set departure time. There-
fore, charging may not complete by the set time due to
charging conditions. To have the high voltage battery fully
charged, allow charging to continue.
The charging end time does not match the estimated end
time due to the condition of the power source or the outside
temperature.
If sudden changes in temperature or changes in the
condition of the power source occur while charging,
charging may not end exactly at the time estimated by the
system.
Troubleshooting
64
Loading ...
Loading ...
Loading ...