Subaru 2019 Crosstrek Hybrid

OWNER'S MANUAL - Page 179

For 2019 CROSSTREK HYBRID.

PDF File Manual, 496 pages, Read Online | Download pdf file

Loading ...
Loading ...
Loading ...
(177,1)
北米Model "A1360BE-A" EDITED: 2018/ 8/ 31
3-1. Push-button ignition
switch
S03BG
& Safety precautions
S03BG04
Refer to “Safety precautions” FP143.
& Operating range for push-
button start system
S03BG01
1) Antenna
2) Operating range
NOTE
. If the access key fob is not detected
within the operating range of the anten-
nas inside the vehicle, the push-button
ignition switch and the hybrid system
start cannot be operated.
. Even when the access key fob is
outside the vehicle, if it is placed too
close to the glass, it may be possible to
switch the power or to start the hybrid
system.
. Do not leave the access key fob in
the following places. It may become
impossible to operate the push-button
ignition switch and the hybrid system
start. It may also cause a false warning
to issue although no malfunction actu-
ally occurs, or not to issue a warning
when any malfunction occurs.
On the instrument panel
On the floor
Inside the glove box
Inside the door trim pocket
On the rear seat
In the cargo area
. When operating the push-button
ignition switch or starting the hybrid
system, if the access key fob battery is
discharged, perform the procedure de-
scribed in “Access key fob if access
key fob does not operate properly”
FP384. In such a case, replace the
battery immediately. Refer to “Repla-
cing battery of access key fob” FP437.
& Switching power status
S03BG02
1) Operation indicator
2) Push-button ignition switch
The power is switched every time the
push-button ignition switch is pressed.
1. Carry the access key fob, and sit in the
drivers seat.
2. Shift the select lever into the “P”
position.
3. Press the push-button ignition switch
without depressing the brake pedal. Every
time the button is pressed, the power is
switched in the sequence of “OFF”, “ACC”,
“ON” and “OFF”. When the hybrid system
is stopped and the push-button ignition
switch is in “ACC” or “ON”, the operation
indicator on the push-button ignition switch
illuminates in orange.
CONTINUED
Push-button ignition switch
175
3
Instruments and controls
Loading ...
Loading ...
Loading ...