Loading ...
Loading ...
Loading ...
(31,1)
北米Model "A1360BE-A" EDITED: 2018/ 8/ 31
tions:
– During gasoline engine warm-up
– During high voltage battery char-
ging
– When the temperature of the high
voltage battery is high or low.
– When the windshield defogger
switch is pressed.
Depending on the circumstances, the
gasoline engine may also not stop
automatically in situations other than
those above.
! When braking (regenerative brak-
ing)
SHSAA0303
The electric motor (traction motor) charges
the high voltage battery.
The EV driving range can be extended by
actively using this regenerative braking to
store electricity in the high voltage battery.
Moreover, as fuel consumption is also
reduced when driving using both the
electric motor and engine, the regenera-
tive braking system can be used effec-
tively.
NOTE
. In the following situations, kinetic
energy is converted to electric energy
and deceleration force can be obtained
in conjunction with the recharging of
the high voltage battery.
– The accelerator pedal is released
while driving with the select lever
position in “D” or “B”.
– The brake pedal is depressed
while driving with the select lever
position in “D” or “B”.
. When the high voltage battery is
fully charged, it is not recharged by
regenerative braking.
& Hybrid system operation
mode selection switch
SHSAA02
Hybrid Mode switch
The hybrid system operation modes can
be selected using the switch.
NOTE
. If there is not enough electrical
power in the high voltage battery, it is
not possible to select the Hybrid Bat-
tery Save Mode.
. The Hybrid Battery Charge Mode
cannot be selected if the high voltage
battery is almost completely charged.
! Switching to the Hybrid Battery
Save Mode
SHSAA0201
Pressing the Hybrid Mode switch while it is
in the Normal Mode or Hybrid Battery
Charge Mode can be selected to the
Hybrid Battery Save Mode.
The Hybrid Battery Save Mode indicator
illuminates when the mode is switched to
Hybrid Battery Save Mode. The Driver
Assist indicator at the top of the combina-
tion meter also illuminates in yellow-green
for approximately 5 seconds.
Hybrid Battery Save Mode will be canceled
by pressing the Hybrid Mode switch.
! Switching to the Hybrid Battery
Charge Mode
SHSAA0202
1. Press and hold the Hybrid Mode
switch.
2. Release the switch once the Hybrid
Battery Charge Mode indicator starts to
blink.
The indicator illuminates when the switch
to Hybrid Battery Charge Mode is com-
plete. The Driver Assist indicator at the top
– CONTINUED –
Hybrid system features
29
HS
Hybrid system
Loading ...
Loading ...
Loading ...