Loading ...
Loading ...
Loading ...
(273,1)
北米Model "A1360BE-A" EDITED: 2018/ 8/ 31
6-5. USB power supply
S06AY
CAUTION
. The specification of a USB term-
inal that can be used is the A-
type. If a different specification of
terminal is connected, power
supply or charging may not be
possible, or the device may mal-
function.
. There is a risk that a connected
device may malfunction or data
may be damaged. The connec-
tion of a device shall be per-
formed at your responsibility.
. To avoid an electric shock or a
malfunction, observe the follow-
ing precautions.
– Do not connect a USB hub.
– Do not insert any metal or
other foreign object into the
USB terminal.
– Do not spill water or other
liquid on the USB terminal.
. Be careful not to pull the con-
nected cable. Doing so could
break the USB terminal and the
connected device.
. If a device is connected for a long
time when the engine is not
running, doing so may cause the
risk of a discharged battery. Even
when the engine is running, we
recommend that you do not con-
nect a device for an unnecessa-
rily long time.
. Do not connect a malfunctioning
device. Doing so may cause the
risk of smoke and fire.
NOTE
. The rated voltage of each USB
terminal is 5 V. For details about a
maximum rated power, refer to “How to
use the USB power supply” FP271.
Before connecting a device, be sure to
read the instruction manual of the
device and check whether or not this
specification of the output is supported
by the device. If a device that requires
power exceeding the maximum rating
is connected, power supply or charging
may not be possible. Even if charging
could be completed, the time required
for charging may be longer than when
the genuine charger for that device is
used.
. Depending on the device, charging
may be possible only when a special
cable is used. In this case, be sure to
connect the device using the special
cable.
. When a device that communicates
with a PC is connected, power supply
or charging may not be possible.
. When connect a device for charging,
disconnect the device promptly after
charging is completed.
& How to use the USB power
supply
S06AY01
Console USB power supply (power supply
function only)
When the ignition switch is in the “ACC” or
“ON” position and a USB electronic device
is connected to the USB terminal, 5 V DC
power can be supplied to the device. Use
the USB terminal to use or charge an
electronic device.
– CONTINUED –
USB power supply
271
6
Interior equipment
Loading ...
Loading ...
Loading ...