Loading ...
Loading ...
Loading ...
(292,1)
北米Model "A1360BE-A" EDITED: 2018/ 8/ 31
“P” position, and switch the power to
“ACC”. Depress the brake pedal, and
press the push-button ignition switch
for at least 15 seconds. The hybrid
system may start. Only use this hybrid
system start procedure in case of
emergency.
. When the hybrid system does not
start, the brake pedal may feel stiff. In
such a case, depress the brake pedal
more forcefully than usual. Check that
the operation indicator on the push-
button ignition switch turns green, and
press the push-button ignition switch
to start the hybrid system.
. When starting the hybrid system, the
flashing time of the Hybrid READY
indicator light may be long. Leave the
vehicle as it is until the Hybrid READY
indicator light is steady on, as steady
means the vehicle is able to move.
. If the hybrid system does not start,
the charge cable may be connected to
the vehicle.
. In the event that the Hybrid READY
indicator light does not come on even
after performing the proper procedures
for starting the vehicle, contact your
SUBARU dealer immediately.
. When the high voltage battery is
extremely cold (below approximately
−228F (−308C)) under the influence of
the outside temperature, it may not be
possible to start the hybrid system. In
this case, try to start the hybrid system
again after the temperature of the high
voltage battery increases due to the
outside temperature increase etc.
& Stopping the hybrid system
S07BE04
1. Stop the vehicle completely.
2. Move the select lever to the “P”
position.
3. Press the push-button ignition switch.
The hybrid system will stop, and the power
will be switched off.
WARNING
. Do not touch the push-button
ignition switch during driving.
When the push-button ignition
switch is operated as follows,
the hybrid system will stop.
– The switch is pressed and held
for 3 seconds or longer.
– The switch is pressed briefly 3
times or more in succession.
When the hybrid system stops,
the brake booster will not func-
tion. A greater foot pressure will
be required on the brake pedal.
The power steering system will
not operate either. A greater force
will be required to steer, and it
may result in an accident.
. If the hybrid system stops during
driving, do not operate the push-
button ignition switch or open
any of the doors until the vehicle
is stopped in a safe location. It is
dangerous because the steering
lock may be activated. Stop the
vehicle in a safe place, and con-
tact a SUBARU dealer immedi-
ately.
CAUTION
. Do not stop the hybrid system
while the select lever is in a
position other than the “P” posi-
tion.
. If the hybrid system is stopped
while the select lever is in a
position other than the “P” posi-
tion, the power will be in “ACC”. If
the vehicle is left in this condi-
tion, the 12 V battery may be
discharged.
NOTE
Although you can stop the hybrid
Starting and stopping the hybrid system
290
Loading ...
Loading ...
Loading ...