Loading ...
Loading ...
Loading ...
(319,1)
北米Model "A1360BE-A" EDITED: 2018/ 8/ 31
reversing the vehicle.
Example 2
1) The detection range of the radar sensors
C) Vehicle that may be detected.
NOTE
The system may detect that a vehicle
(C) is passing in front of your vehicle.
Always be sure to check the surround-
ings with your eyes when reversing the
vehicle.
& System operation
S07BM02
! Operating conditions
S07BM0201
The BSD/RCTA will operate when all of the
following conditions are met.
. The ignition switch is in the “ON”
position.
. The BSD/RCTA warning indicator and
BSD/RCTA OFF indicator are turned off.
. The vehicle is driven at speeds above 7
mph (12 km/h) (except when reversing).
. The select lever is in the “R” position
(when reversing).
The BSD/RCTA will not operate in the
following situations.
. The BSD/RCTA OFF indicator is on.
. The vehicle speed is below 6 mph (10
km/h) even when the BSD/RCTA OFF
indicator remains off (except when rever-
sing).
NOTE
. In the following case, the BSD/RCTA
will stop operating and the BSD/RCTA
warning indicator will appear. If the
BSD/RCTA warning indicator appears,
have your vehicle inspected at a
SUBARU dealer as soon as possible.
– When a malfunction occurs in the
system, including the BSD/RCTA
approach indicator light.
. In the following cases, the BSD/
RCTA will temporarily stop operating
(or may stop operating) and the BSD/
RCTA OFF indicator will appear.
– When the radar sensor becomes
significantly misaligned (If the or-
ientation of the radar sensor is
shifted for any reason, readjust-
ment is required. Have the sensor
adjusted at a SUBARU dealer.)
– When a large amount of snow or
ice sticks to the rear bumper sur-
face around the radar sensors
– When the vehicle is driven on a
snow-covered road or in an envir-
onment in which there are no ob-
jects around (such as in a desert) for
a long time.
– When the temperature around the
radar sensors increased exces-
sively due to long driving on uphill
grades in summer, etc.
– When the temperature around the
radar sensors becomes extremely
low.
– When the 12 V battery voltage
lowers.
– When the 12 V battery becomes
overvoltage.
When the above conditions are cor-
rected, the BSD/RCTA will resume op-
eration and the BSD/RCTA OFF indica-
tor will disappear. However, if the BSD/
RCTA OFF indicator has appeared for a
prolonged time, have the system in-
spected at a SUBARU dealer as soon as
possible.
– CONTINUED –
BSD/RCTA
317
7
Starting and operating
Loading ...
Loading ...
Loading ...