Loading ...
Loading ...
Loading ...
CB / CB-UL, CBF / CBF-UL (E7) 07/2021 Page 50/197
4.5.4.1 Scope of delivery
The optional water container set includes all necessary connecting parts:
• Art. no. 8009-1128 Set with freshwater can, magnetic support and connecting parts
The water container set includes:
• Magnetic can holder adjustable in height, consisting of magnetic holder (art.no. 8022-0009) and water
can support (art.no. 4021-0724)
• Water can, 10 l (art.no. 6011-0192)
• Hose coupling with aqua stop (art.no. 6002-0637)
• Angular coupling plug with aqua stop (art.no. 6002-0638)
• 12 gas fine filters (sterile filter) (art.no. 6014-0012)
• 10 m silicone tube (DN 3mm) (art.no. 6008-0267) to the pump or via T-type tube connectors to further
chambers
• 50 cm silicone tube, d10 x 2 (art.no. 6008-0268)
• Reducing connector (tube connector 4/9 mm) (art.no. 6009-0308)
• 4 wire tension clamps (art.no. 6009-0281) (2 spare parts)
• 3 T-type tube connectors (T-Pieces), 4mm (art.no. 6009-0318)
• Instructions (art.no. 7001-0385)
4.5.4.2 Installation and connection of the freshwater can (optional water container set)
The optional water container set includes all necessary connecting parts.
First, the silicone hose DN 3mm (24) must be connected to the chamber and led through the pump
(12) Pump head
(12a) Pump head cover
(12b) Tube retainer
(12c) Rotor
(13) Pump connector
(24) Silicone tube DN 3mm to water can
Figure 21: Installation of the water supply at the pump
Please proceed in the following order:
• Turn the pump head (12) counterclockwise until it stops and remove it from the pump connector (13).
• Pull up the tongue of the tube retainer (12b) up to “Click” and remove it. Take the rotor (12c) out of the
pump head cover (12a). ①
• Lead the silicone tube along the rotor. Insert the rotor with the tube into the pump head cover. Keep the
hose tight and do not pinch it.②
(13) (12c)
(12b) (12a)
①
②
③
Loading ...
Loading ...
Loading ...