Loading ...
Loading ...
Loading ...
CB / CB-UL, CBF / CBF-UL (E7) 07/2021 Page 138/197
17.2 Function of the dehumidifying system
To reduce the humidity, ambient air is sucked in through a gas fine filter (sterile filter). As a result, the air in
the interior is diluted with the air from outside. The air tube for inlet of the ambient air is located in the upper
right corner in the recess for the freshwater bag. We recommend replacing the sterile filter on this tube
about once a month. To replace the sterile filter, see chap. 22.2.3.
18. Options
18.1 APT-COM™ 4 Multi Management Software (option)
The chamber is regularly equipped with an Ethernet interface (5) that can connect the BINDER APT-COM™
4 Multi Management Software. The MAC Address is indicated in the “Device info” controller menu (chap.
14.5.2.2). The actual values of temperature, CO
2
, O
2
(chamber with O
2
control) and humidity (CBF / CBF-
UL) are given at adjustable intervals. Programming can be performed graphically via PC. Up to 100
chambers can be cross-linked. For further information on networking please refer to the operating manual
of the BINDER communication software APT-COM™ 4.
18.2 Silicone access ports 30 mm / 1.18 in, closable from both sides with silicon
plugs (option)
(a)
(b)
(c)
Figure 30: Positions of the optional silicon access ports left (a), rear (b), and right (c)
A warning sticker is located above each access port on the outside of the incubator.
Loading ...
Loading ...
Loading ...