Loading ...
Loading ...
Loading ...
Fuses and bulbs
Note
●
Please check at regul
ar intervals that all
lighting (especially the exterior lighting) on
your vehicle is functioning properly. This is
not only in the interest of your own safety,
but also that of all other road users.
●
Before changing a bulb, make sure you
have the correct new bulb.
●
Do not touch the glass part of the bulb
with your bare hands, use a cloth or paper
towel instead, since the fingerprints left on
the glass will vaporise as a result of the
heat generated by the bulb, they will be
deposited on the reflector and will impair
its surface.
●
Depending on the level of equipment fit-
ted in the vehicle, LEDs may be used for
part or all of the interior and/or exterior
lighting. LEDs have an estimated life that
exceeds than that of the car. If an LED light
fails, go to an authorised workshop for its
replacement.
Change the front bulbs
Dipped headlight bulb
Fig. 106 Dipped beam headlights.
Fig. 107
Dipped beam headlights.
–
Raise the bonnet.
–
Move the loops
›
›
›
Fig. 106
1
in the direc-
tion of the arr
o
w and r
emove the cover.
–
Remove connector
›››
Fig. 107
2
from the
bulb
.
–
Unclip the r
et
ainer spring
›››
Fig. 107
3
pressing inwards to the right.
–
Extract the bulb and fit the replacement so
that the lug on the base fits int
o the r
ecess
on the r
eflector.
Day light bulb
Fig. 108
Day light bulb.
–
Raise the bonnet.
–
Turn the bulb holder
›
›
›
Fig. 108
1
anti-
cl
ockwise and pull.
–
R
emo
ve the bulb by pressing on the bulb
holder and turning it anti-clockwise at the
same time.
–
Installation involves all of the above steps in
reverse sequence.
93
Loading ...
Loading ...
Loading ...