Loading ...
Loading ...
Loading ...
Lights and visibility
Motorway light*
The motorway light is available on vehicles
equipped with full-LED lights.
The function is connected/disconnect
ed via
the corresponding Easy Connect system
menu.
●
Activation: when going above 110 km/h
(68 mph) for more than 30 seconds, the dip-
ped beam raises slightly to increase the driv-
er's visibility distance.
●
Deactivation: when reducing the speed of
the car belo
w 100 km/h (62 mph), the dipped
beam returns to its normal position.
Driving abroad
The light beam of the dipped beam lights is
asymmetric: the side of the r
oad on which
you ar
e driving is lit mor
e intensely.
When a car that is manufactured in a country
that drives on the right travels to a country
that drives on the left (or vice versa), it is nor-
mally necessary to cover part of the head-
light bulbs with stickers or to change the ad-
justment of the headlights to avoid dazzling
other drivers.
In such cases, the regulations specify certain
light values that must be complied with for
designated points of the light distribution. This
is known as “Tourist light”.
The light distribution that the halogen and
full-LED headlights of the SEAT Leon range
have allows the specific “tourist light” values
to be met without the need for stickers or
changes in the settings.
Note
“Tourist light” is only allowed temporarily. If
you are planning a l
ong stay in a country
that drives on the other side, you should
take the vehicle to an Authorised Technical
Service to change the headlights.
Headlight range control
Fig. 153
Next to the steering wheel: regulator
headlight r
ange contr
ol
.
The lights range control adapts according to
the v
alue of the headlight beam and the v
ehi-
cl
e load status. This offers the driver optimum
visibility and the headlights do not dazzle on-
coming drivers
›››
.
The headlights can only be adjust
ed when
the dipped beam is s
wit
ched on.
To reset, turn switch
›››
Fig. 153:
Value Vehicle load status
a)
Two front occupants, luggage compart-
ment empty
All seats occupied, luggage compart-
ment empty
All seats occupied, luggage compart-
ment full. With trail
er and minimum
drawbar load.
Driver only, luggage compartment full
With trailer and maximum dr
awbar load.
a)
If the vehicle load does not correspond to those
sho
wn in the t
abl
e, it is possible to select intermediary
positions.
OR:
Using the Easy Connect system, by means of
the /
button and the function button
Vehicle > SETTINGS > Lights > Head-
light height adjustment
›
›
›
page 35.
Setting 0
Two front occupants, luggage com-
partment empty
»
149
Loading ...
Loading ...
Loading ...