Loading ...
Loading ...
Loading ...
The essentials
Securing a child seat with the seat belt
Fig. 38 On rear seats: possible assemblies of chil-
dren seats.
Figure
›
›
›
Fig. 38
A
shows the basic child re-
str
aint syst
em mounting using l
ower retaining
rings and the upper retaining strap. Figure
›››
Fig. 38
B
shows the child restraint system
mounting using the v
ehicl
e seat belt.
The seat belt may be used t
o secure univer-
sal type child seats to the vehicle seats
marked with a U in the table below.
If the front passenger seat lacks a height ad-
justment, child seats cannot be mounted is
this location
1)
.
To correctly use a child seat in the back, the
front backrest must be adjusted so that there
is no contact with the child seat in the back in
the case that it goes opposite to the direction
of the car. In the case of front facing restraint
systems, the front backrest must be adjusted
so that there is no contact with the child's
feet.
To adjust the passenger seat to accommo-
date a child's seat and get the seat belt in a
perfect position, adjust the passenger back-
rest as far forward as possible
1)
.
Starting with Group 0+ child seats should not
be mounted facing backwards in the passen-
ger seat given that due to the size of some of
them, they can be difficult to install.
1)
.
The systems include the child restraint
system mounting with an upper retaining
strap (Top Tether) and lower anchoring
points on the seat.
»
1)
Compliance with current national legislation
and the manufactur
er's instructions is required
when using or installing child seats.
27
Loading ...
Loading ...
Loading ...