Loading ...
Loading ...
Loading ...
Towing bracket device
●
Pl
ace co
v
er
B
in the lock in the direction of
arr
o
w
3
›
›
›
Fig. 297
›››
.
●
Check that the detachable ball is securely
att
ached
›
›
›
page 305, Safety check.
CAUTION
●
After remo
ving the key, always place the
cover over the lever's lock. If the lock be-
comes soiled it will be impossible to insert
the key.
●
Keep the towing bracket device's housing
cavity clean at all times. Dirtiness can pre-
vent the detachable ball from being prop-
erly secured!
●
If the detachable ball is removed, always
place the cap on the hook's housing.
Safety check
Fig. 298 Detachable ball properly attached.
Whenever you go to use the detachable ball,
mak
e sur
e that it is pr
operly attached first.
Detachable ball properly attached.
●
The detachable ball will not fall out of the
housing cavity after a major “knock or jerk”.
●
Lever
A
›
›
›
Fig. 298 is fully raised.
●
The release bolt
B
›
›
›
Fig. 298 is sticking
fully out (the red and green part is visible).
●
The key has been removed.
●
Cover
C
›
›
›
Fig. 298 is placed over the
lock.
WARNING
The towing bracket device should only be
used if the detachable ball has been pr
op-
erly locked!
Removing the tow hitch. Step 1
Fig. 299
Removing the lock cover.
Fig. 300
Releasing the lock.
●
Remove cover
A
from the lock in the direc-
tion of arr
o
w
1
›
›
›
Fig. 299.
●
Insert key
B
into the lock in the direction of
arr
o
w
2
›
›
›
Fig. 300.
●
Turn the key in the direction of arrow
3
un-
til the part of the k
ey with the hol
es is f
acing
upwards.
»
305
Loading ...
Loading ...
Loading ...