Loading ...
Loading ...
Loading ...
Driving
●
The volume and tone of the w
arnings can
be modified, in addition to the indications
›››
page 298.
●
In vehicles without an infotainment sys-
tem, these parameters can be modified in a
SEAT Official Service or in a specialised
workshop.
●
Please observe information on towing a
trailer
›››
page 298.
●
The display on the Easy Connect screen
shows a slight time delay.
Parking System Plus*
Description
Fig. 284
Represented area.
The P
arking System Plus assists the driver
by visually and audibly w
arning them about
obst
acles detected in front of and behind the
vehicle.
There are sensors integrated in the front and
rear bumpers. When they detect an obstacle,
you are alerted by audible warnings and vis-
ually on the Easy Connect system.
In the event of danger of collision with an ob-
stacle, it is possible to know if the obstacle is
in front of the vehicle or behind it by choosing
different sounds.
Make particularly sure that the sensors are
not covered by adhesives, residues and the
like, as this could affect the system's opera-
tion. Cleaning instructions
›››
page 346.
The approximate measurement range of the
sensors is:
1.20 m
0.60 m
1.60 m
0.60 m
As you approach the obstacle, the time inter-
val between the audible warnings will be re-
duced. When you reach around 0.30 m the
warning will be constant: do not continue to
move forward (or backward)!
If you maintain separation from the obstacle,
the volume of the warning begins to reduce
after four seconds (does not affect the tone
of the constant warning).
A
B
C
D
Parking Aid operation
Fig. 285
Centre console: parking aid button.
Manual connection of Parking Aid
●
Press the butt
on
once
.
Manual disconnection of Parking Aid
●
Press the button again.
Manual disconnection of Parking Aid dis-
play (the audible sounds remain active)
●
Press a button on the main menu of the fac-
tory-assembled infotainment system.
●
OR press the BACK
function button.
Aut
omatic connection of P
arking Aid
●
Engage r
everse gear or turn the selector
lever to position R.
294
Loading ...
Loading ...
Loading ...