Loading ...
Loading ...
Loading ...
Seats and head restraints
Adjusting the head restraints
–
To set the head restraint higher, grasp the
sides with both hands and mo
v
e it up
wards,
until you see it engage.
–
To set the head restraint lower down, press
the
1
›
›
›
Fig. 159 button and move it
downwards.
Removing the head restraint
To remove the head restraint, the corre-
sponding backrest must be partially folded
forward.
–
Unlock the backrest
›››
page 160.
–
Move the head restraint upwards until it ar-
rives to the top.
–
Press button
1
›
›
›
Fig. 159, while simulta-
neously pressing on the security hole
2
›››
Fig. 159 with a fl
at scr
e
wdriver a maxi-
mum of 5 mm wide, and remove the head
restraint.
–
Move the backrest until it engages properly
›››
.
Fitting the head r
estr
aint
T
o mount the external head restraints, the
corresponding backrest must be partially fol-
ded forward.
–
Unlock the backrest
›››
page 160.
–
Insert the head restraint bars into the
guides until they perceptibly engage. It
should not be possible to remove the head
restraint from the backrest.
–
Move the backrest until it engages properly
›››
.
WARNING
●
Please observe the gener
al notes
›››
page 68.
●
Remove the rear head restraints only
when it is necessary for the placement of a
child seat
›››
page 80. After removing a
child seat, remount the head restraint im-
mediately. Travelling with the head re-
straints removed or improperly adjusted in-
creases the risk of severe injuries.
Seat functions
Intr
oduction
WARNING
Inappropriate use of the seat functions can
cause sever
e injuries.
●
Assume the proper sitting position before
your trip and remain in it throughout. This
also applies to the other occupants.
●
Always keep hands, fingers, feet and oth-
er parts of the body away from the operat-
ing radius and the adjustment of seats.
Seat heating
Fig. 160 On the centre console: front seats
heating switch
The seat cushions can be heated electrically
when the ignition is s
wit
ched on. The backr
est
is also heated in some versions.
The seat heating should not be engaged in
any of the following conditions:
●
The seat is unoccupied.
●
The seat has a covering.
●
There is a child seat installed in the seat.
●
The seat cushion is wet or damp.
●
The indoor or outdoor temperature is great-
er than +25°C (+77°F).
Activate
Press the button
or
. Seat heating is
switched on fully.
»
157
Loading ...
Loading ...
Loading ...